CERTIFIED GREEN LINE: BETTER PERFORMANCE FOR ALUMINUM AND NON-FERROUS MATERIALS.

Scroll left to right to view the chart.

Certified GREEN LINE			CHIP LOAD (IPT, BASED ON CUTTER DIAMETER)
MATERIAL	GRADE	SFM	1/8"	3/16"	1/4"	3/8"	1/2"	5/8"	3/4"	1"
Aluminum	440, 356, 380, C61300	550-1100	0.001	0.002	0.002	0.003	0.004	0.005	0.006	0.007
Aluminum	2024-T4/T6, 2014, 6061-T6/T651, 7075-T6	850-1600	0.001	0.002	0.002	0.003	0.004	0.005	0.006	0.007
Copper	C46400 Brass, High Silicon Bronze, A-17, C-17200	650-1100	0.001	0.002	0.002	0.0025	0.003	0.004	0.004	0.005
Copper	Yellow Brass, Leaded Brass, Red Brass	850-1600	0.001	0.002	0.002	0.0025	0.003	0.004	0.004	0.005
Copper Alloys	Nickel Silver, Beryllium Copper, Oxygen-Free Copper, Bronze	750-1100	0.001	0.002	0.002	0.0025	0.003	0.004	0.004	0.005
Magnesium	Die-Cast, Extruded	1000-1300	0.001	0.002	0.002	0.003	0.004	0.006	0.008	0.009
Plastics	Polycarbonate	250-550	0.001	0.002	0.003	0.004	0.006	0.008	0.01	0.015
Plastics	Acrylics, Phenolics, Polysulfone	250-650	0.001	0.002	0.003	0.004	0.006	0.008	0.01	0.015

CERTIFIED RED LINE: unparalleled results for high-temperature alloys and titanium. Scroll left to right to view the chart.

Scroll left to right to view the chart.

Certified RED LINE			CHIP LOAD (IPT, BASED ON CUTTER DIAMETER)
MATERIAL	GRADE	SFM	1/8"	3/16"	1/4"	3/8"	1/2"	5/8"	3/4"	1"
Cobalt	NASA CO-W-RE, Haynes 21/36	40-80	0.0004	0.0005	0.001	0.001	0.001	0.001	0.0015	0.002
Cobalt	Stellite, HS-21, Haynes 25/188, L-605, X-40	60-100	0.0004	0.0005	0.001	0.001	0.001	0.001	0.0015	0.002
Iron	A-286, Haynes 556, Discoly, V57	50-80	0.0005	0.0005	0.001	0.0015	0.002	0.0025	0.003	0.004
Iron	Incoly 600-802	80-100	0.0005	0.0005	0.001	0.0015	0.002	0.0025	0.003	0.004
Nickel	Hastalloy-C/B/X, INCONEL 718/X/W, Waspalloy, Rene 41-95	40-60	0.0005	0.0005	0.001	0.001	0.002	0.0025	0.003	0.004
Nickel	INCONEL 600/625, Nickel 200-270, Monel 400-405	45-110	0.0005	0.0005	0.001	0.001	0.002	0.0025	0.003	0.004
Titanium	5AL-2.5Sn-Eli, 8Al-1 Mo-1V	90-130	0.0005	0.0005	0.0005	0.001	0.001	0.0015	0.002	0.004
Titanium	Pure Alloy, 6AL-4V, ASTM 1/2/3, 6AL-25N-4Zr-2Mo-Si	50-260	0.0005	0.0005	0.0005	0.001	0.001	0.0015	0.002	0.004

CERTIFIED BLUE LINE: LONGER TOOL LIFE FOR IRON, STEEL, AND STAINLESS.

Scroll left to right to view the chart.

Certified BLUE LINE			CHIP LOAD (IPT, BASED ON CUTTER DIAMETER)
MATERIAL	GRADE	SFM	1/8"	3/16"	1/4"	3/8"	1/2"	5/8"	3/4"	1"
Ductile Iron	Gray Cast Iron	125-450	0.0005	0.001	0.002	0.003	0.004	0.005	0.006	0.008
Ductile Iron	Ductile Cast Iron (21-36HRc)	90-150	0.0005	0.001	0.0015	0.002	0.002	0.003	0.004	0.005
Ductile Iron	Ductile Cast Iron (36+ HRc)4	120-450	0.0005	0.001	0.0015	0.002	0.002	0.003	0.004	0.005
Ductile Iron	Malleable	90-260	0.0005	0.001	0.002	0.003	0.004	0.005	0.006	0.008
Low Alloy	23XX, 31XX	120-160	0.0005	0.001	0.0015	0.002	0.003	0.004	0.005	0.006
Low Alloy	10XX, 11XX, 13XX	100-315	0.0005	0.001	0.0015	0.002	0.003	0.004	0.005	0.006
Medium Alloy	200, 250, 301	112-360	0.0005	0.0005	0.001	0.002	0.0025	0.0035	0.004	0.005
Medium Alloy	200, 250, 300	65-130	0.0005	0.0005	0.001	0.002	0.0025	0.0035	0.004	0.005
High Alloy	A-2/6/10, P-3/10, 01, 02, 06	125-275	0.0005	0.0005	0.001	0.001	0.001	0.0015	0.002	0.004
High Strength	4340M, EDT-150, HP9-430, 300M, D6-Ac, 11-10	80-180	0.0005	0.0005	0.001	0.001	0.001	0.0015	0.002	0.004
High Strength	4340, 6150, 52100, H11, H13	50-250	0.0005	0.0005	0.001	0.001	0.001	0.0015	0.002	0.004
Stainless (Austenic)	304, 310, 314, 316, 321, 330, 347, 348, 21-6-9	130-260	0.0001	0.0002	0.0005	0.001	0.0015	0.002	0.003	0.004
Stainless (Austenic)	200 Series, 302, 303, 304L, 316L	100-350	0.0001	0.0002	0.0005	0.001	0.0015	0.002	0.003	0.004
Stainless (PH)	17/4, 17/7, 15/7 Mo, 21-6-9, AF-71	95-265	0.0005	0.0005	0.001	0.001	0.002	0.002	0.004	0.006
Stainless (PH)	13/8, 15/5, AM-350/355	100-250	0.0005	0.0005	0.001	0.001	0.002	0.002	0.004	0.006
Stainless (Martensitic)	420, 430F, 440C, 446	10-260	0.0001	0.0002	0.0005	0.0005	0.001	0.001	0.003	0.004
Stainless (Martensitic)	403, 410, 416	100-250	0.0001	0.0002	0.0005	0.0005	0.001	0.001	0.003	0.004
Carbon	Graphite	650-1000	0.004	0.004	0.006	0.008	0.01	0.01	0.015	0.02

LET’S GET STARTED.

Ready to find the perfect tool, machining or PVD coating solution? Get started today.

Get a Quote

CERTIFIED GREEN LINE: BETTER PERFORMANCE FOR ALUMINUM AND NON-FERROUS MATERIALS.

CERTIFIED RED LINE: unparalleled results for high-temperature alloys and titanium. Scroll left to right to view the chart.

CERTIFIED BLUE LINE: LONGER TOOL LIFE FOR IRON, STEEL, AND STAINLESS.

LET’S GET STARTED.

COMPANY

INDUSTRIES

RESOURCES

LEGAL